7204hvi-sv не прошивается

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

7204hvi-sv не прошивается

Сообщение Maikl1981 » 18 окт 2018, 21:26

нужна правильная прошивка на 7204hvi-sv.
U-Boot 2010.06 (Jul 26 2013 - 17:14:08)
*** Warning - bad CRC, using default environment
Hit ctrl+u to stop autoboot: 1  0
This program will upgrade software.

*******************************************************
* ATTENTION!! PLEASE READ THIS NOTICE CAREFULLY! *
* Don't reset machine,or anything that interrupt it. *
* The upgrade process must finish in 10 minutes! *
* If this program fails,machine might be unusable, *
* and you will need to reflash again. *
* If you find this too risky,power off machine now. *
*******************************************************
Now press [u/U] key to upgrade software: u
File system error,please upgrade by TFTP

Please input ip address of device: 192.1 0.0.64
Please input ip address of upgrade server: 192.0.012  .0 128
Confirm?(y/n): y
jffs2 part info : offset = 0x60000, size = 0xfa0000
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0x80020000
Downloading: *# [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
################################ [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
################################ [ 9.000 MB]
################################ [10.000 MB]
################################ [11.000 MB]
################################ [12.000 MB]
################################ [13.000 MB]
################################ [14.000 MB]
################################ [15.000 MB]
################################ [16.000 MB]
################################ [17.000 MB]
################################ [18.000 MB]
################################ [19.000 MB]
################################ [20.000 MB]
################################ [21.000 MB]
################################ [22.000 MB]
################################ [23.000 MB]
################################ [24.000 MB]
################################ [25.000 MB]
################################ [26.000 MB]
################################ [27.000 MB]
################################ [28.000 MB]
################################ [29.000 MB]
################################ [30.000 MB]
################################ [31.000 MB]
####
done
Bytes transferred = 32662946 (1f265a2 hex)
hicore.tar.lzma checkSum ok !
app.tar.lzma checkSum ok !
dvrCmd.tar.gz checkSum ok !
misc.tar.lzma checkSum ok !
hisi.tar.lzma checkSum ok !
uImage checkSum ok !
ramdisk.gz checkSum ok !
start.sh checkSum ok !
webs.tar.lzma checkSum ok !
logo.tar.lzma checkSum ok !
version checkSum ok !
player.bin checkSum ok !
new_10.bin checkSum ok !
new_20.bin checkSum ok !
jffs2: add update file(hicore.tar.lzma)...dirent name hicore.tar.lzma, len = 55
(3773520B->3840196B)done.
jffs2: add update file(app.tar.lzma)...dirent name app.tar.lzma, len = 52
(725800B->738704B)done.
jffs2: add update file(dvrCmd.tar.gz)...dirent name dvrCmd.tar.gz, len = 53
(11576B->11904B)done.
jffs2: add update file(misc.tar.lzma)...dirent name misc.tar.lzma, len = 53
(173056B->176172B)done.
jffs2: add update file(hisi.tar.lzma)...dirent name hisi.tar.lzma, len = 53
(979312B->996708B)done.
jffs2: add update file(uImage)...dirent name uImage, len = 46
(1917072B->1947496B)done.
jffs2: add update file(ramdisk.gz)...dirent name ramdisk.gz, len = 50
(909288B->925360B)done.
jffs2: add update file(start.sh)...dirent name start.sh, len = 48
(1648B->1648B)done.
jffs2: add update file(webs.tar.lzma)...dirent name webs.tar.lzma, len = 53
(2437736B->2480876B)done.
jffs2: add update file(logo.tar.lzma)...dirent name logo.tar.lzma, len = 53
(60976B->62120B)done.
jffs2: add update file(version)...dirent name version, len = 47
(16B->132B)done.
jffs2: add update file(player.bin)...dirent name player.bin, len = 50
(432640B->412056B)done.
jffs2: add update file(new_10.bin)...dirent name new_10.bin, len = 50
(1064B->628B)done.
jffs2: add update file(new_20.bin)...dirent name new_20.bin, len = 50
(1172B->696B)done.
Erasing SPI flash...done
Writing SPI flash...done
Upgrade check ......done



Upgrade success!
Press ENTER key to reboot
resetting ...

U-Boot 2010.06 (Jul 26 2013 - 17:14:08)
*** Warning - bad CRC, using default environment
Hit ctrl+u to stop autoboot: 1  0

MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin
load: Failed to find inode
### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK


Starting kernel ...
Uncompressing Linux... done, booting the kernel.

iTuneDVR
Сообщения: 3218
Зарегистрирован: 24 авг 2013, 11:05

Re: 7204hvi-sv не прошивается

Сообщение iTuneDVR » 18 окт 2018, 22:59

Пробовать другой вариант.
В твоей 3 прошивки в 1 файле.
На шильдике регистратора какая стартовая прошивка, если написано?

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

Re: 7204hvi-sv не прошивается

Сообщение Maikl1981 » 18 окт 2018, 23:15

на плате есть номер 80123(v 2.3)-A. попробовал 7 разных прошивок, но заливаются только с размером 21-31 мб. я так понимаю нужна старая прошивка.

что значит 3 прошивки в файле? из за размера, так меньше 20мб пишет сразу ошибку.

флешка стоит 25q128

iTuneDVR
Сообщения: 3218
Зарегистрирован: 24 авг 2013, 11:05

Re: 7204hvi-sv не прошивается

Сообщение iTuneDVR » 19 окт 2018, 16:26

Те, которые 21мб там 2 в 1. можно просто разделить и это и определить какое все таки железо у тебя и далее уже пробовать подобрать.
В архиве две прошивки разделенные из одной в 21 мб.
Которая из них устанавливается?
Вложения
digicap.zip
(20.65 МБ) 294 скачивания

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

Re: 7204hvi-sv не прошивается

Сообщение Maikl1981 » 19 окт 2018, 19:23

та что под номером 2 не льётся пишет ошибка
Please input ip address of device: 192.0.0.64
Please input ip address of upgrade server: 192.0.0.128
Confirm?(y/n): y
jffs2 part info : offset = 0x60000, size = 0xfa0000
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0x80020000
Downloading: # [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
################################ [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
################################ [ 9.000 MB]
################################ [10.000 MB]
############
done
Bytes transferred = 10889953 (a62ae1 hex)
The board info: language - 0x1 device_class - 0x16 oemCode - 0x1
upgrade packet mismatch, please select correct packet
Can not find correct packet for upgrade,give up

Та что под номером 1 льется но без изменений
Please input ip address of device: 192.0.0.64
Please input ip address of upgrade server: 192.0.0.128
Confirm?(y/n): y
jffs2 part info : offset = 0x60000, size = 0xfa0000
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0x80020000
Downloading: # [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
################################ [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
################################ [ 9.000 MB]
################################ [10.000 MB]
##########
done
Bytes transferred = 10844519 (a57967 hex)
hicore.tar.lzma checkSum ok !
app.tar.lzma checkSum ok !
dvrCmd.tar.gz checkSum ok !
misc.tar.lzma checkSum ok !
hisi.tar.lzma checkSum ok !
showlogo checkSum ok !
webs.tar.lzma checkSum ok !
logo.tar.gz checkSum ok !
version checkSum ok !
player.bin checkSum ok !
uImage checkSum ok !
ramdisk.gz checkSum ok !
start.sh checkSum ok !
jffs2: add update file(hicore.tar.lzma)...dirent name hicore.tar.lzma, len = 55
(3252383B->3309868B)done.
jffs2: add update file(app.tar.lzma)...dirent name app.tar.lzma, len = 52
(681944B->694068B)done.
jffs2: add update file(dvrCmd.tar.gz)...dirent name dvrCmd.tar.gz, len = 53
(12819B->13216B)done.
jffs2: add update file(misc.tar.lzma)...dirent name misc.tar.lzma, len = 53
(166814B->169796B)done.
jffs2: add update file(hisi.tar.lzma)...dirent name hisi.tar.lzma, len = 53
(970111B->987304B)done.
jffs2: add update file(showlogo)...dirent name showlogo, len = 48
(22968B->13528B)done.
jffs2: add update file(webs.tar.lzma)...dirent name webs.tar.lzma, len = 53
(2378479B->2420496B)done.
jffs2: add update file(logo.tar.gz)...dirent name logo.tar.gz, len = 51
(86985B->88604B)done.
jffs2: add update file(version)...dirent name version, len = 47
(9B->128B)done.
jffs2: add update file(player.bin)...dirent name player.bin, len = 50
(432640B->411616B)done.
jffs2: add update file(uImage)...dirent name uImage, len = 46
(1897420B->1927280B)done.
jffs2: add update file(ramdisk.gz)...dirent name ramdisk.gz, len = 50
(940321B->957044B)done.
jffs2: add update file(start.sh)...dirent name start.sh, len = 48
(990B->468B)done.
Erasing SPI flash...done
Writing SPI flash...done
Upgrade check ......done

Upgrade success!
Press ENTER key to reboot
resetting ...


U-Boot 2010.06 (Jul 26 2013 - 17:14:08)

*** Warning - bad CRC, using default environment

Hit ctrl+u to stop autoboot: 0
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin

load: Failed to find inode

### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Please input ip address of device: Please input ip address of upgrade server:

iTuneDVR
Сообщения: 3218
Зарегистрирован: 24 авг 2013, 11:05

Re: 7204hvi-sv не прошивается

Сообщение iTuneDVR » 19 окт 2018, 21:07

А что было изначально, предистория этого?
Возможно в консоли и не должно быть информативного вывода старта, но стоит дождаться ведь рано и ли поздно должен сработать watchdog b и должна быть перезагрузка.
При первом старте должен создаться файл конфигурации, но пока ошибка.
Может быть что-то с флешем.
Попробовать вариант в аттаче.
Вложения
V2.2.7 build130626_Multilingual.zip
(10.62 МБ) 292 скачивания

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

Re: 7204hvi-sv не прошивается

Сообщение Maikl1981 » 19 окт 2018, 22:08

это с последним файлом.
15 мин подождал и ничего.
флеш посавил новую в неё залил дамп со старой.

Please input ip address of device: 192.0.0.64
Please input ip address of upgrade server: 192.0.0.128
Confirm?(y/n): y
jffs2 part info : offset = 0x60000, size = 0xfa0000
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0x80020000
Downloading: # [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
################################ [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
################################ [ 9.000 MB]
################################ [10.000 MB]
#####################
done
Bytes transferred = 11188163 (aab7c3 hex)
hicore.tar.lzma checkSum ok !
uImage checkSum ok !
app.tar.lzma checkSum ok !
dvrCmd.tar.gz checkSum ok !
misc.tar.lzma checkSum ok !
hisi.tar.lzma checkSum ok !
ramdisk.gz checkSum ok !
showlogo checkSum ok !
start.sh checkSum ok !
webs.tar.lzma checkSum ok !
logo.tar.gz checkSum ok !
version checkSum ok !
player.bin checkSum ok !
jffs2: add update file(hicore.tar.lzma)...dirent name hicore.tar.lzma, len = 55
(2792172B->2841496B)done.
jffs2: add update file(uImage)...dirent name uImage, len = 46
(1875692B->1905036B)done.
jffs2: add update file(app.tar.lzma)...dirent name app.tar.lzma, len = 52
(1201935B->1223284B)done.
jffs2: add update file(dvrCmd.tar.gz)...dirent name dvrCmd.tar.gz, len = 53
(7116B->7308B)done.
jffs2: add update file(misc.tar.lzma)...dirent name misc.tar.lzma, len = 53
(323925B->329764B)done.
jffs2: add update file(hisi.tar.lzma)...dirent name hisi.tar.lzma, len = 53
(1127116B->1147108B)done.
jffs2: add update file(ramdisk.gz)...dirent name ramdisk.gz, len = 50
(928785B->945404B)done.
jffs2: add update file(showlogo)...dirent name showlogo, len = 48
(22968B->13328B)done.
jffs2: add update file(start.sh)...dirent name start.sh, len = 48
(1047B->476B)done.
jffs2: add update file(webs.tar.lzma)...dirent name webs.tar.lzma, len = 53
(2124993B->2162708B)done.
jffs2: add update file(logo.tar.gz)...dirent name logo.tar.gz, len = 51
(86985B->88604B)done.
jffs2: add update file(version)...dirent name version, len = 47
(9B->128B)done.
jffs2: add update file(player.bin)...dirent name player.bin, len = 50
(694784B->674360B)done.
Erasing SPI flash...done
Writing SPI flash...done
Upgrade check ......done

Upgrade success!
Press ENTER key to reboot
resetting ...


U-Boot 2010.06 (Jul 26 2013 - 17:14:08)

*** Warning - bad CRC, using default environment

Hit ctrl+u to stop autoboot: 0
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin

load: Failed to find inode

### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

Re: 7204hvi-sv не прошивается

Сообщение Maikl1981 » 19 окт 2018, 22:11

с этой моделью и раньше была проблема, я фоткал именно плату и отсылал на сервис они мне присылали прошивку. щас сервис молчит.

iTuneDVR
Сообщения: 3218
Зарегистрирован: 24 авг 2013, 11:05

Re: 7204hvi-sv не прошивается

Сообщение iTuneDVR » 19 окт 2018, 23:34

После перезагрузки принудительной несколько раз дай вывод лога.

Maikl1981
Сообщения: 63
Зарегистрирован: 06 фев 2017, 00:38

Re: 7204hvi-sv не прошивается

Сообщение Maikl1981 » 19 окт 2018, 23:56

U-Boot 2010.06 (Jul 26 2013 - 17:14:08)

*** Warning - bad CRC, using default environment

Hit ctrl+u to stop autoboot: 0
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin

load: Failed to find inode

### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.


U-Boot 2010.06 (Jul 26 2013 - 17:14:08)

*** Warning - bad CRC, using default environment

Hit ctrl+u to stop autoboot: 0
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin

load: Failed to find inode

### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.


U-Boot 2010.06 (Jul 26 2013 - 17:14:08)

*** Warning - bad CRC, using default environment

Hit ctrl+u to stop autoboot: 0
MAC: 8C-E7-48-4D-D2-61
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
|RCV UDP pack timeout| TFTP server not found
16384 KiB hi_sfc at 0:0 is now current device

find_inode failed for name=devCfg.bin

load: Failed to find inode

### JFFS2 LOAD ERROR<0> for devCfg.bin!
file devCfg.bin doesn't exist
## Booting kernel from Legacy Image at 80400000 ...
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 80800000 ...
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.


Вернуться в «Видеорегистраторы HIKVISION»