Код: Выделить всё
hisilicon # help
? - alias for 'help'
base - print or set address offset
bootm - boot application image from memory
bootp - boot image via network using BOOTP/TFTP protocol
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
erase_env- erase_env erase the environment
ext2load- load binary file from a Ext2 filesystem
ext2ls - list files in a directory (default /)
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
getinfo - print hardware information
go - start application at address 'addr'
help - print command description/usage
loadb - load binary file over serial line (kermit mode)
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nand - NAND sub-system
nboot - boot from NAND device
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
rarpboot- boot image via network using RARP/TFTP protocol
reset - Perform RESET of the CPU
saveenv - save environment variables to persistent storage
setenv - set environment variables
sf - SPI flash sub-system
tftp - tftp - download or upload image via network using TFTP protocol
update - update uboot
update kernel
update rootfs
update app
update all
usb - USB sub-system
usbboot - boot from USB device
version - print monitor version
hisilicon # printenv
bootcmd=sf probe 0;sf read 0x82000000 0x50000 0x2b0000;bootm 0x82000000
bootdelay=1
baudrate=115200
ethaddr=00:00:23:34:45:66
ipaddr=192.168.100.101
serverip=192.168.100.100
update_enable=n
update_partition=0123456789abcdef
cntfail=0
latefail=0
errk=0
errr=0
erra=0
netmask=255.255.255.0
bootfile="uImage"
update_postfix=.bin.hi3516c
resetpin=61
resetidle=1
resettime=050
cntboot=6
stampb=000109325541
stdin=serial
stdout=serial
stderr=serial
verify=n
update_result=0-NotEnable
bootargs=mem=0x60M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=cramfs mtdparts=hi_sfc:320K(uboot),2752K(kernel),3072K(rootfs),9472K(app),384K(config),384K(log),-(else) reset=0
ver=U-Boot 2010.06.150104 (Jan 04 2015 - 14:34:24)
Environment size: 715/65532 bytes