Вот лог с европейской прошивкой. Все тоже. заставка и черный экран.
U-Boot 2008.10-svn910 (Aug 24 2010 - 11:16:52)
DRAM: 256 MB
manufacturer_id=0x89, id1=0x7e,id2=0x2101
Flash: 16 MB
Hit ctrl+u to stop autoboot: 0
|NUL ethaddr| TFTP server not found
### JFFS2 loading 'uImage' to 0xc0008000
Scanning JFFS2 FS: . done.
### JFFS2 load complete: 1988136 bytes loaded to 0xc0008000
## Booting kernel from Legacy Image at c0008000 ...
Image Name: Linux-KY2010-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1988072 Bytes = 1.9 MB
Load Address: c0800000
Entry Point: c0800000
Loading Kernel Image ... OK
OK
Starting kernel ...
init started: BusyBox v1.1.2 (2012.03.22-05:56+0000) multi-call binary
Starting pid 270, console /dev/console: '/bin/mount'
Starting pid 272, console /dev/console: '/bin/mount'
Starting pid 274, console /dev/console: '/bin/mount'
Starting pid 276, console /dev/console: '/bin/sh'
Starting pid 278, console /dev/console: '/bin/sh'
Creating initial udev device nodes ... done.
mount jffs2 filesystem done.
start device, please wait...
decompress application package done.
decompress misc done.
decompress IE control done.
g_cpldinfo->viType = 6
g_cpldinfo->bPanel = 0
scriptCmd:./load3515 -i.
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110104: 0x00009654 --> 0x00009654
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110100: 0x00000887 --> 0x00000887
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011010c: 0x00000003 --> 0x00000003
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110110: 0x00000007 --> 0x00010303
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110114: 0x00000007 --> 0x00010303
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110118: 0x00010F01 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011011c: 0x00010F01 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110128: 0x00010020 --> 0x00010020
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011012c: 0x000103A2 --> 0x00010601
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110130: 0x00000005 --> 0x00010803
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110134: 0x00000007 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20110138: 0x00010804 --> 0x00010804
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x2011013c: 0x00000007 --> 0x00000007
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20050078: 0x00000000 --> 0x00008002
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x20050054: 0x00004002 --> 0x00001573
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x200f0094: 0x00000001 --> 0x00000001
*** Board tools : ver0.0.1_20060106 ***
[debug]: {source/utils/cmdshell.c:166}cmdstr:himm
0x200f0098: 0x00000001 --> 0x00000001
g_cpldinfo->viType = 6
g_cpldinfo->bPanel = 0
*** shmget CREATE.
g_cpldinfo->viType = 6
g_cpldinfo->bPanel = 0
===========>is cvbs:1.
videoOutMode:0, bVgaDisp:0.
---viType = 1,device_memsize = 256, maxD1EncChns = 8, armNeedBufLen = 5242880---
---bSupportZeroEncode=1 NetOsdType=2---
POOL ID:0, u32BlkSize=608256, u32BlkCnt=64
POOL ID:1, u32BlkSize=304128, u32BlkCnt=64
POOL ID:2, u32BlkSize=0, u32BlkCnt=0
POOL ID:3, u32BlkSize=0, u32BlkCnt=0
---InitAudio aiType = 1, talkBackType = 0---
voStandard = 2, boardtype = 12
--------InitZeroEnc!--------
zero channel VeGroup=32, VeChn=32
sub zero channel VeGroup=32, VeChn=33
--------ZeroEnc Init OK!--------
callback 359a8
***** InitDsp OK*****
DSP START OK
name = eth0 speed = 0, duplex = 0, and autoneg = 1
=============set mtu OK!!!===========
=============set ipaddr OK!!!===========
=============set netmask OK!!!===========
=============set ipaddr OK!!!===========
U-Boot 2008.10-svn910 (Aug 24 2010 - 11:16:52)
DRAM: 256 MB
manufacturer_id=0x89, id1=0x7e,id2=0x2101
Flash: 16 MB
Hit ctrl+u to stop autoboot: 0
TFTP server found
TFTP from server 192.0.0.128; our IP address is 192.0.0.64
Download Filename 'digicap.dav'.
Download to address: 0xc0800000
Downloading: %T %T %# [ Connected ]
################################ [ 1.000 MB]
################################ [ 2.000 MB]
################################ [ 3.000 MB]
################################ [ 4.000 MB]
################################ [ 5.000 MB]
################################ [ 6.000 MB]
################################ [ 7.000 MB]
################################ [ 8.000 MB]
################################ [ 9.000 MB]
########################
9.782 MB download ok.
done
Bytes transferred = 10238511 (9c3a2f hex)
jffs2: add update file(uImage)...(1983284B->2005464B)done.
jffs2: add update file(rootfs.img)...(606665B->612308B)done.
jffs2: add update file(720.bits)...(829456B->104412B)done.
jffs2: add update file(initrun.sh)...(1072B->524B)done.
jffs2: add update file(hicore.tar.bz2)...(3018795B->3065976B)done.
jffs2: add update file(misc.tar.bz2)...(2233370B->2261552B)done.
jffs2: add update file(webs.tar.bz2)...(1546929B->1573472B)done.
jffs2: add update file(t1)...(18524B->10900B)done.
Scanning JFFS2 FS: . done.
jffs2: add flash file(player.bin)...(726016B->630116B)done.
jffs2: add flash file(netOsd.bin)...(13312B->508B)done.
jffs2: add flash file(devCfg.bin)...(480504B->17844B)done.
jffs2: add flash file(USAGE232)...(8B->124B)done.
Un-Protect Flash space
................................................................................
.......................................... done
Un-Protected 122 sectors
erase Flash space
................................................................................
.......................................... done
Erased 122 sectors
Writing jffs2 to Flash... done
Re-Protect Flash space
................................................................................
.......................................... done
Protected 122 sectors
### JFFS2 loading 'uImage' to 0xc0008000
Scanning JFFS2 FS: . done.
### JFFS2 load complete: 1983284 bytes loaded to 0xc0008000
## Booting kernel from Legacy Image at c0008000 ...
Image Name: Linux-KY2010-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1983220 Bytes = 1.9 MB
Load Address: c0800000
Entry Point: c0800000
Loading Kernel Image ... OK
OK
Starting kernel ...
init started: BusyBox v1.1.2 (2010.05.27-03:29+0000) multi-call binary
Starting pid 270, console /dev/console: '/bin/mount'
Starting pid 272, console /dev/console: '/bin/mount'
Starting pid 274, console /dev/console: '/bin/mount'
Starting pid 276, console /dev/console: '/bin/sh'
Starting pid 278, console /dev/console: '/bin/sh'
Creating initial udev device nodes ... done.
mount jffs2 filesystem done.
start device, please wait...
decompress application package done.
decompress misc done.
decompress IE control done.
g_cpldinfo->bPanel = 0
getPPPOECfg: Config file too big, paraLen = 480504(479976).
# g_cpldinfo->bPanel = 0
Config file too big, paraLen = 480504(479976).
Restore default parameter.
g_cpldinfo->bPanel = 0
===========>is cvbs:1.
videoOutMode:0, bVgaDisp:0.
viType = 1,device_memsize = 256, maxD1EncChns = 8, armNeedBufLen = 5242880
POOL ID:0, u32BlkSize=608256, u32BlkCnt=64
POOL ID:1, u32BlkSize=304128, u32BlkCnt=64
POOL ID:2, u32BlkSize=0, u32BlkCnt=0
POOL ID:3, u32BlkSize=0, u32BlkCnt=0
***InitAudio aiType = 1***
voStandard = 2, boardtype = 12
########################
callback 35898
***** InitDsp OK*****
DSP START OK
setVoQuality: mode = 0
name = eth0 speed = 0, duplex = 0, and autoneg = 1
U-Boot 2008.10-svn910 (Aug 24 2010 - 11:16:52)
DRAM: 256 MB
manufacturer_id=0x89, id1=0x7e,id2=0x2101
Flash: 16 MB
Hit ctrl+u to stop autoboot: 0
Up/Down PHY not link.
TFTP server auto connect disabled
### JFFS2 loading 'uImage' to 0xc0008000
Scanning JFFS2 FS: . done.
### JFFS2 load complete: 1983284 bytes loaded to 0xc0008000
## Booting kernel from Legacy Image at c0008000 ...
Image Name: Linux-KY2010-1
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1983220 Bytes = 1.9 MB
Load Address: c0800000
Entry Point: c0800000
Loading Kernel Image ... OK
OK
Starting kernel ...
init started: BusyBox v1.1.2 (2010.05.27-03:29+0000) multi-call binary
Starting pid 270, console /dev/console: '/bin/mount'
Starting pid 272, console /dev/console: '/bin/mount'
Starting pid 274, console /dev/console: '/bin/mount'
Starting pid 276, console /dev/console: '/bin/sh'
Starting pid 279, console /dev/console: '/bin/sh'
Creating initial udev device nodes ... done.
mount jffs2 filesystem done.
start device, please wait...
decompress application package done.
decompress misc done.
decompress IE control done.
g_cpldinfo->bPanel = 0
# g_cpldinfo->bPanel = 0
g_cpldinfo->bPanel = 0
===========>is cvbs:0.
videoOutMode:0, bVgaDisp:1.
viType = 1,device_memsize = 256, maxD1EncChns = 8, armNeedBufLen = 5242880
POOL ID:0, u32BlkSize=608256, u32BlkCnt=64
POOL ID:1, u32BlkSize=304128, u32BlkCnt=64
POOL ID:2, u32BlkSize=0, u32BlkCnt=0
POOL ID:3, u32BlkSize=0, u32BlkCnt=0
***InitAudio aiType = 1***
voStandard = 2, boardtype = 12
########################
callback 35898
***** InitDsp OK*****
DSP START OK
setVoQuality: mode = 0
name = eth0 speed = 0, duplex = 0, and autoneg = 1
