3104P NVR Bricked

[iTuneDVR]

I think IMG_20160202_233107.jpg
bottom-right 4 dot
Test it may
+5(+3,3) Rx,Tx,Gd
But you ring Gd, then DVR is off & you test votage contact then DVR on.
Other dot is Rx and Tx.
Use normal TTL2RS232 adapter that you connect to you PC COM or USB
If you use USB do not use power dot!!!

[chamek]

think i have orderd the wrong cable. I order a cable like this one:
http://www.aliexpress.com/item/PL2303TA ... e2d464d6a0

So do i need to order another cable or is this one oke? What do i need to do?
BTW. If found the dots you mean i've zoomed in at picture.
https://drive.google.com/file/d/0B6hZTk ... daeGs/view

picture name: IMG_20160202_234503.jpg

[iTuneDVR]

Take voltage tester in your hands.
Find contact land him and attached needle and connect to MB.
Find contact + 5V (3.3) and do not use it because your USB option.
The remaining two pins supplied as is, do not go, then reversed.
Configuring the driver on your TTL2RH232 adapter.
In the settings of the COM port put speed - 115200, flow control - none.
Use HyperTerminal program.

[chamek]

Hi i am back

I got me a multimeter as i didnt have one and i have searched for a part with four needles to attach to the motherboard.
https://drive.google.com/open?id=0B6hZT ... WRWd2FBS2s

First i fully unscrewed the motherboard from the case.
I made some new pictures from the back to show to you:
https://drive.google.com/open?id=0B6hZT ... EFPdmhCazQ

Now there are two options to insert the pins in J7 (bottom right) or (J5 Upper left)
At the back J5 has a description as J7 dont.

J5 back:
https://drive.google.com/open?id=0B6hZT ... ks5ZkpsaGs

J7 back:
https://drive.google.com/open?id=0B6hZT ... FJIa1NEZUE
https://drive.google.com/open?id=0B6hZT ... DlMRWlRYlE

Tried to get the voltage with a multi meter put it on a insert a needle and tried to read it out but im just a big noob.

First question:
What do you mean with contact land him? Do you mean the squire?

Second Q:
With the back info is it more clear which one i need upper or lower dots?

And what color needs to be used on what needle? as i have 4 colors white green red black.

[iTuneDVR]

Enable access to your link or share to another resource!
Where are you from?

[chamek]

I am from the Netherlands.

[iTuneDVR]

I am from the Netherlands.

Any service, who can rebold flash? Maybe in Gemany?

[chamek]

I dont know but i would like to try it out my self.

[chamek]

pictures are accessible

[iTuneDVR]

I dont know but i would like to try it out my self.

ok

pictures are accessible

Yes!