IPC-HFW1100SP
Перезагружается.
rs232->tftp->(прошивка HFW11XX(с польского FTP))-> OK -> reboot
перезагружается на том-же месте
rs232->tftp->(прошивка HFW11XX по отдельности 12 файлов .img (найдена у братьев итальянцев))
run up
run da
run ... т.д., как написано в printenv
-> OK -> reboot
тоже самое.
Код: Выделить всё
U-Boot 2010.06-svn2134 (May 26 2014 -16:15:03)
DRAM: 256MiB
Check spi flash controller v 350... Found
Spi(cs1):Block:64KB Chip:16MB Name:"MX25L128XX"
boot from spi
partition file version 2
rootfstype squashfs root /dev/mtdblock7
In: serial
Out: serial
Err: serial
TEXT_BASE:81000000
Hisilicon ETH net controler
MAC: 90-02-A9-44-C6-C4
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending thro1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x84000000
Downloading: *
Retry count exceeded; starting again
Fail to get info file!
Init error!
Hisilicon ETH net controler
miiphy_register: non unique device name '0:1'
miiphy_register: non unique device name '0:2'
MAC: 90-02-A9-44-C6-C4
UP_PORT : phy status change : LINK=DOWN : DUPLEX=FULL : SPEED=100M
UP_PORT : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending thro1
Download Filename 'failed.txt'.
Download to address: 0x82000000
Downloading: *
Retry count exceeded; starting again
SPI probe: 16384 KiB hi_sfc at 0:0 is now current device
## Booting kernel from Legacy Image at 82000000 ...
Image Name: Linux-3.0.8
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1337924 Bytes = 1.3 MiB
Load Address: 80008000
Entry Point: 80008000
Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock7
cmdLine mem=85M console=ttyS0,115200 root=/dev/mtdblock7 rootfstype=squashfs
crashflasg:1, logmagic:54410011.
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Linux version 3.0.8 (huang_zhendi@localhost.localdomain) (gcc version 4.4.1 (Hi4
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: hi3518
appauto=0
dh_keyboard=0
ethaddr0=90:2:a9:44:c6:c4
ethaddr1=0:0:0:0:0:0
wifiAddr=0:0:0:0:0:0
lip0=192.168.1.108
lip1=0.0.0.0
id=TZC4CU029W00086
U-Boot 0x40000 0x80000 0x0
hwid 0x40000 0xc0000 0x0
partition 0x40000 0x100000 0x0
custom 0x20000 0x140000 0x0
product 0x20000 0x160000 0x0
Kernel 0x160000 0x180000 0x0
web 0x220000 0x2e0000 0x0
romfs 0x1a0000 0x500000 0x0
user 0x840000 0x6a0000 0x0
syslog 0x60000 0xee0000 0x0
config 0x60000 0xf40000 0x0
backup 0x60000 0xfa0000 0x0
num parts is 12.
Ignoring unrecognised tag 0x54410011
Memory policy: ECC disabled, Data cache writeback
AXI bus clock 220000000.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 21590
Kernel command line: mem=85M console=ttyS0,115200 root=/dev/mtdblock7 rootfstyp
dh_keyboard:0
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 85MB = 85MB total
Memory: 82548k/82548k available, 4492k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
vmalloc : 0xc5800000 - 0xfe000000 ( 904 MB)
lowmem : 0xc0000000 - 0xc5500000 ( 85 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.init : 0xc0008000 - 0xc0020000 ( 96 kB)
.text : 0xc0020000 - 0xc035d000 (3316 kB)
.data : 0xc035e000 - 0xc03782e0 ( 105 kB)
.bss : 0xc0378304 - 0xc038f758 ( 94 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:32 nr_irqs:32 32
sched_clock: 32 bits at 110MHz, resolution 9ns, wraps every 39045ms
Console: colour dummy device 80x30
Calibrating delay loop... 218.72 BogoMIPS (lpj=1093632)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
NET: Registered protocol family 16
Serial: AMBA PL011 UART driver
uart:0: ttyS0 at MMIO 0x20080000 (irq = 5) is a PL011 rev2
console [ttyS0] enabled
uart:1: ttyS1 at MMIO 0x20090000 (irq = 5) is a PL011 rev2
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource timer1
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. (NAND) �© 2001-2006 Red Hat, Inc.
msgmni has been set to 161
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
Spi id table Version 1.22
Spi(cs1) ID: 0xC2 0x20 0x18 0xC2 0x20 0x18
SPI FLASH start_up_mode is 3 Bytes
Spi(cs1):
Block:64KB
Chip:16MB
Name:"MX25L128XX"
spi size: 0x16777216
chip num: 1
Creating 12 MTD partitions on "hi_sfc":
0x000000080000-0x0000000c0000 : "U-Boot"
0x0000000c0000-0x000000100000 : "hwid"
0x000000100000-0x000000140000 : "partition"
0x000000140000-0x000000160000 : "custom"
0x000000160000-0x000000180000 : "product"
0x000000180000-0x0000002e0000 : "Kernel"
0x0000002e0000-0x000000500000 : "web"
0x000000500000-0x0000006a0000 : "romfs"
0x0000006a0000-0x000000ee0000 : "user"
0x000000ee0000-0x000000f40000 : "syslog"
0x000000f40000-0x000000fa0000 : "config"
0x000000fa0000-0x000001000000 : "backup"
Fixed MDIO Bus: probed
himii: probed
PPP generic driver version 2.4.2
NET: Registered protocol family 24
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
hiusb-ehci hiusb-ehci.0: HIUSB EHCI
hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1
hiusb-ehci hiusb-ehci.0: irq 15, io mem 0x100b0000
hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
hiusb-ohci hiusb-ohci.0: HIUSB OHCI
hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2
hiusb-ohci hiusb-ohci.0: irq 16, io mem 0x100a0000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
TCP bic registered
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Registering the dns_resolver key type
registered taskstats version 1
�VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
devtmpfs: mounted
Freeing init memory: 96K
proc_file_read: Apparent buffer overflow!
proc_file_read: Apparent buffer overflow!
proc_file_read: Apparent buffer overflow!
.'��ѕ����������ѕ��quoted string
keyboard = 0
Hisilicon Media Memory Zone Manager
hi3518_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
Hisilicon UMAP device driver interface: v3.00
pa:85500000, va:c5a00000
load sys.ko for Hi3518...OK!
load viu.ko for Hi3518...OK!
ISP Mod init!
load vpss.ko ....OK!
load venc.ko for Hi3518...OK!
load group.ko for Hi3518...OK!
load chnl.ko for Hi3518...OK!
load h264e.ko for Hi3518...OK!
load jpege.ko for Hi3518...OK!
load rc.ko for Hi3518...OK!
load region.ko ....OK!
[OSA-DRV] OSA Build on Nov 27 2014 at 13:41:35.
[OSA-DRV] SVN NUM: 3047.
[OSA-DRV] Monitor Task pid=474 tid=474
[LOG-DRV] LOG Build on Mar 5 2014 at 17:06:42.
[LOG-DRV] SVN NUM: 5356.
[LOG-DRV] ramStart:0x0;ramSize:0x0;select:0
[OSA-DRV] Char device create OK !
[LOG-DRV] coreId = 0, logLevel = 2
[LOG-DRV] coreId = 1, logLevel = 2
[LOG-DRV] coreId = 2, logLevel = 2
[LOG-DRV] coreId = 3, logLevel = 2
[LOG-DRV] coreId = 4, logLevel = 2
[LOG-DRV] coreId = 5, logLevel = 2
00:00:04|[Binder] Binder.ko Build on Sep 3 2013 at 10:07:04.
00:00:04|[Binder] SVN NUM: 1366.
00:00:04|[Binder] Create binder memory pool(size:524288) OK!
00:00:04|[Binder] Create binder memory pool(size:3145728) OK!
00:00:04|[Binder] NameServer Initial OK !
00:00:04|[Binder] Binder Initial OK !
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[Binder] SR driver initial OK !
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[Binder] NS driver initial OK !
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[Binder] Binder driver initial OK !
00:00:04|[SPF] SPF Build on Apr 23 2014 at 20:23:56.
00:00:04|[SPF] SVN NUM: 5976.
00:00:04|[SPF] SIL initial OK !
00:00:04|[SPF] SPF initial ok !
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[SPF] SPF Proc Create OK!!!
00:00:04|[SPF] SPF driver initial ok !
00:00:04|[prc] PRC Driver Build on Jun 12 2014 at 16:05:38.
00:00:04|[prc] SVN NUM: 2234.
00:00:04|[prc] Start to init module!
00:00:04|[prc] pinmux init ok
00:00:04|[prc] gpio soc init ok
00:00:04|[prc] spi init ok
00:00:04|[prc] IIC init ok
00:00:04|[prc] PRC_wdtInit OK
00:00:04|[prc] PRC_rtcInit OK!
00:00:04|[prc] i2c businit ok
00:00:04|[prc] DMA init ok
00:00:04|[SPF] Dai 3 register OK !
00:00:04|[prc] IIS init: ok
00:00:04|[SPF] codecType 32 register OK !
00:00:04|[prc] Codec init ok
00:00:04|[prc] Success to init module!
00:00:04|[pdc]
PDC Build on Aug 19 2014 at 17:21:03.
00:00:04|[pdc] SVN NUM: 4564.
00:00:04|[pdc] BASE_LINE: 210
00:00:04|[pdc] OSA_kProcCreate OK
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[pdc] PDC_PartionInit ok!!
00:00:04|[pdc] HWID : IPC-HDW1100S:01:02:04:1D:0E:00:01:00:00:00:00:190:00:00:00
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[pdc] binderFlag: 0x3, funcap: 0x18538b,0x0,0x0,0x0
00:00:04|[OSA-DRV] recordTsk Task pid=515 tid=515
00:00:04|[pdc] SenCfg Match OK,pCfgParams->pCfg: bf2690bc
00:00:04|[pdc] PDC_PRODUCT_OWNER: 0
00:00:04|[pdc] Find Product: IPC-HDW1100S.
00:00:04|[pdc] wifi cut down 0
00:00:04|[pdc] sd cut down 1610612755
00:00:04|[pdc] Config size 1428 !
00:00:04|[pdc] SenCfgSize: 204 Bytes
00:00:04|[pdc] Init spiBus2 Successed!
00:00:04|[prc] WARN : TheKernel: ssp initial ok!
I2C0 has benn created
00:00:04|[pdc] Init I2CBus0 Successed!
00:00:04|[pdc] PDC_MODULE_RESET_STATE
00:00:04|[pdc] Dev has No shutDown Cfg!
00:00:04|[pdc] P***************AT88SC Crypt Version***************
DC_pinInit As UsType: DH General. UserZone ReadOnly: false
ual!
SVN: 2263
00:00:04|[pdc] GBuilt in: Jun 24 2014 16:19:37
et reset pin: 12**************************************************
OK !
00:00:04|[pdc] ircut types = [0]
00:00:04|[pdc] ircut types = [1]
00:00:04|[pdc] ircut types = [2]
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[pdc] Get comPort Cfg ok !0sa
00:00:04|[pdc] PDC_comInit OK!
00:00:04|[pdc] PDC_MODULE_SENSOR
00:00:04|[pdc] Try RtcDev: SocRtc
00:00:04|[pdc] phyaddr = 854ff000, memLen = 1000
00:00:04|[pdc] DDRdata crc incorrect, Load from sramFile
00:00:04|[pdc] phyaddr = 854ff000, memLen = 1000
00:00:04|[pdc] DDRdata crc incorrect, Load from sramFile
00:00:04|[pdc] A B OK
00:00:04|[pdc] Both of Chief and Backup File CRC check OK!
00:00:04|[pdc] phyaddr = 854ff000, memLen = 1000
00:00:04|[pdc] DDRdata crc incorrecterror: write byte error
, Load from sramerror: write_nbytes failed
File
rror: verify_read_password failed, PAC = ffffffff
32m00:00:04|[pdcerror: authenticate failed
] Both of Chief and Backup File CRC check OK!
00:00:04|[pdc] phyaddr = 854ff000, memLen = 1000
00:00:04|[pdc] Choose RtcType: 4 -> SocRtc
00:00:04|[OSA-DRV] Char device create OK !
00:00:04|[pdc] OSA_kProcAddFile:pdcRtc OK!
Restarting system.
00:00:04|[pdc] DDRdata crc incorrecterror: write byte error, Load from sramerror: write_nbytes failed
Возможно прошивки не подходят?